Dimensions: 99 inch
Scope of use: Universal
1.Items you need to prepare：Scissor, knife,towel, scraper, water, car decal.
2.Straighten the car decal stickers and Separate the left and right sides of the car decals with scissors;
3.Determine where you need to paste and then wash it;
4.Turn over the decal and pull the back paper off;
5.Evenly sprinkle water on the parts to be attached - to reduce the viscosity of the sticker and to adjust the position;
6.Slowly Stick decal and adjust it to the best position you think;
7.When encountering the door handle or anti-scratch strip, the material should be cut and wrapped according to the situation;
8.Appropriate adjustment, after the general position of the figure is determined, forcefully scrape off water and air bubbles. Carefully peel off the transparent transfer film;
9.Use a knife to inwardly divide the car decals of the car door part
10.Do not let the car sticker and the body have any separation or protrusion;
11.Try to make the water in the car sticker dry out, and conditionally heat it to moderately.
1.If you find a lot of bubbles between the transparent transfer film and the car sticker when you unfold the sticker, don't worry, it is normal, we will finally tear off the transparent transfer film.
2.It is best to paste when the weather is sunny. And do not wash the car within 48 hours.
3.During the process of pasting,don't stretch the car stickers.
4.Because the car stickers have not completely dried out, it is necessary to press the car stickers when slowly tearing the transparent transfer film.