The stickers are the popular style of tide;Can waterproof and dustproof.
Leave no trace of glue after use;Use it to customize your individuality and equipment.
Installation instruction:
1.Determine where you need to paste then wash it;
2.Turn over the decal and pull the back paper off;
3.Evenly sprinkle water on the parts of the car to be pasted - to reduce the viscosity of the sticker and to adjust the position;
4.Slowly Stick decal and adjust it to the best position you think;
5.After the general position of the figure is determined. Carefully peel off the transparent transfer film;
6.Do not let the car sticker and the body have any separation or protrusion;
7.Try to make the water in the car sticker dry out, and conditionally heat it to moderately.
[Notes]
1. Do not wax one week ago before deciding to dress up your car. The wax will make the sticker not sticky. The decal should not be attached when the car is hot. You must wash the car. You can not wash the car within one week after the sticker. Do not expose to the sun within 24 hours; do not wash the car within three days after the car sticker is pasted, do not paste it on a rainy day, the effect will be bad.
2. If the sticker needs to be attached to the door seam or other places where it needs to be moved, don't worry, just use the sharp knife to cut it.
3. During the installation process, don't pull decal too hard.
4.Because the car stickers have not completely dried out, it is necessary to press the car stickers when slowly tearing the transparent transfer film.
[How to clear]
Gently scrape the edges of the sticker w