Sizes: 45.80 inch x 20.43 inch
Scope of use: Universal
1.Determine where you need to paste and then wash it;
2.Turn over the decal and pull the back paper off;
3.Evenly sprinkle water on the parts to be attached - to reduce the viscosity of the sticker and to adjust the position;
4.When encountering the door handle or anti-scratch strip, the material should be cut and wrapped according to the situation;
5.Appropriate adjustment, after the general position of the figure is determined, forcefully scrape off water and air bubbles. Carefully peel off the transparent transfer film;
6.Use a knife to inwardly divide the car decals of the car door part;
7.Do not let the car sticker and the body have any separation or protrusion;
8.Try to make the water in the car sticker dry out, and conditionally heat it to moderately.
1.If you find a lot of bubbles between the transparent transfer film and the car sticker when you unfold the sticker, don't worry, it is normal, we will finally tear off the transparent transfer film.
2.It is best to paste when the weather is sunny. And do not wash the car within 48 hours.
3.Do not wax one week ago. The wax will make the sticker not sticky.
4.During the process of pasting, don't strongly stretch the car stickers.
[How to clear]
Gently scrape the edges of the sticker with your fingernails and tear it off completely, leaving no marks or damage to the paint. If it is too cold in the winter to scrape the corners, the adhesive tape can be properly heated by a hair dryer, and it can be easily removed after being softened.